n the field of communications (TLC), TC Impianti deals with the installation of wired / structured computer networks, also known as structured cabling, or the "hardware" and "software" part of a cable or wi-fi interconnection system.
certified network cable installer training
The tools needed for ATLink data network wiring checks report incorrect connector connections, wrong bit detection, signal-to-noise ratio measurement, interruptions, incorrect wiring, shorts, mapping check, network topology extrapolation and subsequent changes , all in compliance with the EMC Directive 2004/108 / EC and of course with the CE marking.
certified network cable installer
In the LAN certification, the analysis tools verify the passive components of the network, the configuration, but above all the active components such as the Hub network devices (focal node, element that acts as a sorting of data in the network - mainly in a star topology) or as the Switch , the switch or node inside the network that transmits selectively thanks to the correspondence between port and address.
Once the tests have been carried out, ATLink provides the customer with the tables and documentation of the performance of its network, with eventual reporting of malfunctions. LAN network certification allows customers to guarantee their performance over time and to be able to certify their network and cabling in relation to the highest standards of reliability, performance and efficiency.
Correct wiring of the network leads to quality and continuity of performance of the network, so that there is continuous operation without signal transmission errors.
The LAN network certification consists in carrying out, with specific tools, a series of tests on the wired system and allowing to verify the correspondence with the International Standards.
ATLink carries out the LAN network certification service for public and private offices, at companies and on behalf of individuals, with assistance also in the case of further diagnosis and functioning corrections.
certified network cable installer course
Furthermore, having to provide for the use of optical fiber, particular attention must be paid to its installation, to the integration between these cables and those in copper,
The evolution and the need for a wired network is increasing as computer networks play a role in the field of information transmission and are the basis for the use of innovative technologies and applications for the company
The wiring structure is a type of computer network that identifies an integrated infrastructure for the implementation of numerous services (video surveillance and alarm systems can be managed remotely, links to SMART TV etc.) where the main is the use of voice and data , through the integration of different types of interfaces, both of physical connections, such as optical fiber and copper cable, and with the ether through wireless networks. This type of system must be built in a workmanlike manner in compliance with precise international standards.
cable installer certifications
Is the internet browsing speed in the office or at home equal to that of a turtle? Do you have a video surveillance system and can't see the videos well? Perhaps your problem is the LAN network not perfectly functioning because there are anomalies or the cable cabling is not structured cabling and you certainly lack the certification of wired networks.
To stay in compliance with the new standards, certification of Ethernet cables is essential. Ethernet certification guarantees network performance. To do this, the IT teams use certificates to provide reliable information on the network and the compliance of cabling installations. In order to offer an analysis of network performance consistent with current infrastructures, Ethernet certification is carried out through universal tools. These are suitable for both copper cabling and optical transport networks.
The deployment of fiber optics continues in data centers and corporate networks. Whether used in backbone cabling or to connect servers to switches, optical fiber supports higher data speeds and supports distances much greater than copper. Fiber testing and certification ensures that the system, as installed, will support all applications. Certification is usually done during the initial installation by the contractor who builds the network infrastructure. Requiring infrastructure certification provides guarantees from the facility manager
Building wired fiber optic communications networks: pulling fiber optic cables from a communications network on aerial supports - laying fiber optic cables of a communications network on the facade and inside buildings - pulling in underground conduits of optical fiber cables of a communications network - making the junctions of optical fiber cables of a communications network - laying and cabling of end equipment of a communications network using optical fiber cables (5 weeks).
Connect a customer's installation to a wired communications network: pulling and laying copper multipair connection cables for a communications network - installing customer sockets and terminals, connecting to copper multipair cables and checking the connection - pulling and laying fiber optic connection cables for a communications network - installing customer sockets and terminals, connecting to fiber optic cables and checking the connection - pulling and laying coaxial network connection cables communications - installation of customer sockets and terminals, connection to coaxial cables and verification of connection (6 weeks).
certified network cable installer course
Constructing wired communications networks in telephone cable: pulling on overhead supports of copper multipair cables of a communications network - laying on facade and inside buildings of copper multipair cables of a communication network - pulling in underground pipes of copper multipair cables of a communications network - realization of the junctions of copper multipair cables of a communications network - installation and cabling of end equipment of a communications network in copper multipair cables (7 weeks).
Certified level V training lasting approximately 6 months (910 hours).
Indicative and adjustable times according to the needs of the people.
The duration and content of this training can be adjusted according to the regions and the level of the participants.
The organization of the training:
The training consists of 3 modules, supplemented by 2 periods in a company.
Integration period. Reception, presentation of training objectives, knowledge of the professional environment, awareness of sustainable development, adaptation of the training course (1 week).
The installer of wired communications networks works particularly on copper cable as used by the xDSL telephone network (ADSL, HDSL ...), on coaxial cable, generally in the terminal part of the customer and on cable fiber optic, which is developing more and more and allows the implementation of FttX (FttN, FttH ...) for very high speed transmission.
He / she installs the various end equipment (boxes, cabinets, distributors, taps ...) and connects the cables to each other and to this equipment. He / she then ensures the installation of the customer's outlets and terminals and their connection to the network. He / she carries out the tests, measurements, adjustments and checks the connection of the customer's installation to the wired communications network.
certified network cable installer
On the basis of a technical file prepared by a technician, the installer of cable communications networks performs all of the cable pulling, laying and connection work of cables and equipment allowing operators to convey the signals. digital (telephone, television, internet) to their customers.
He / she pulls and sets up the various communications cables in different environments: overhead, on poles, on facade, inside buildings or in underground conduits both for the transport and distribution part of the network and for the customer connection part.
cable installer certifications
This map gives an idea of the needs by department for this family of jobs (Cable network installation technician and all the jobs listed at the bottom of the page).
Select a department: the first number corresponds to offers published on the open labor market, the second to applications for these professions.
certified network cable installer training
Cable network installation technician belongs to the directory of trades created by pole-emploi (rome code I1307). You can find the complete list of all these professions at the bottom of the page, or on the pole emploi site.
The statistics presented relate to this professional family. All the figures come from the open market and allow us to identify a trend in order to determine if the sector is promising.
Testing and verification of optical connections;
Measurement of loss on optical connections;
Inspection and cleaning of optical connectors;
Use of the VFL for the location of faults or defects;
Measurement of insertion loss: main standards and measurement methods;
Using the OTDR: principle of operation
Characteristics of patch panels, junction cabinets and joint containment muffles;
Description of structured optical fiber cabling;
Mechanical and optical characteristics of in-line joints for FO;
Preparation of optical drawers, patch panels, muffles, etc;
Heading technique with pigtails, characteristics of fusion splicing machines and fiber cutters;
Description of the main optical transmission systems;
Brief theory of optical
Optical fiber parameters and performances
Description of the main parameters that characterize
Reference to the main international standards in force, main characteristics of the components - optical in general
Mechanical-optical characteristics of multimode and singlemode FO cables with reference to CPR regulations
Mechanical-optical characteristics of the connectors
After the realization of a structured cabling system using exclusively TCK-LAN® brand products, the certified installer may request, after sending the characteristics of the system created, the 25-year guarantee certificate. We specify that all the components of the harness comply with the RoHS and WEEE international environmental regulations.
The company specializes in the supply of connection technology products and distributes cables , cable glands , connectors and accessories for a wide range of industrial applications. In order to offer real added value to its customers exporting to North America, which is in fact the most important market Lapp pays the most attention to regulatory aspects, offering a wide range of cables, cable glands and UL certified connectors. Recognized worldwide, the US mark certifies the compliance of industrial machinery with the standards in force in the United States and verifies its suitability in relation to the potential risks of fire, electric shock and mechanical hazards.
standards and with the most up-to-date instrumentation. The course is aimed mainly at installers and technicians who deal with cabling and measurements on fiber optic systems. Ample space is also reserved for exercises on instrumental checks in the various measurement configurations, according to the most recent standards and with the most up-to-date instrumentation. The course is mainly aimed at installers and technicians who deal with cabling and measurements on fiber optic systems.
according to the most recent standards and with the most up-to-date instrumentation. The course is mainly aimed at installers and technicians who deal with cabling and measurements on fiber optic systems. Ample space is also reserved for exercises on instrumental checks in the various measurement configurations, according to the most recent
fiber junctions and cabling, in relation to specific applications, in the field of LAN networks, DTV systems, large-scale PON networks, up to ultra FTTH broadband (Fiber to the Home); all in the light of current legislation. It can also boast a good knowledge of measurement methods and practical experience with the most popular test tools, from the simplest to the sophisticated OTDRs. The practical part includes individual exercises on all optical fiber
certified network cable installer course
The topics covered range from installation to termination techniques, to the delicate subject of testing and certification. Those who successfully follow this course are able to demonstrate that they have achieved a good degree of knowledge of optical cable installation techniques, of fiber termination with the different methods that technology makes available, of fiber splicing and mechanical methods. The course provides participants with the necessary skills to create optical
The THD & telecoms fiber optic network cabling installation technician is responsible for installing the cabling for VDI local networks and very high speed data centers, and the implementation of optical fiber in FTTH type telecommunications networks. (fiber to the subscriber).
It is also responsible for the validation of these networks by tests and measurements, and therefore responsible for the good state of completion the customer.
The activities can be broken down into 4 main activities:
Preparation of the intervention from the work order,
Work on customer site as part of a company network cabling
It pulls miles of cables. On poles, on facades, inside buildings or in underground conduits, the installer of cable communications networks installs and connects cables, boxes, boxes, distributors, taps. Objective: that the telephone, television and internet work for all customers.
Also called: copper telecommunication network installer, optical telecommunication network installer (FTTH) .; copper telecommunication network fitter and fitter, optical telecommunication network fitter (FTTH)
Build or modify copper telecommunications networks
Build a customer's installation and connect it to a copper telecommunications network
Build or modify optical telecommunications networks
Build a customer's facility and connect it to an optical telecommunications network
Sectors of activity or types of employment accessible by the holder of the title
Large power line construction companies which have diversified and broadened their fields of intervention in the field of cable communications networks, often called "weak currents".
Cable operators who install and set up their own networks, using "coaxial" or "optical fiber" cables, either for the distribution of satellite packages by cable, or for the establishment of local loops which carry all types of information : channels - data - images (VDI).
Temporary companies that subcontract the implementation of cable communications networks.
Commission the installation and explain to the customer the operating mode of the communications terminals.
Repair and modify wired communications networks
Supply the materials and tools necessary for the modification and repair of a wired communications network.
Ensure the maintenance and proper functioning of wired communications networks.
Troubleshoot a faulty wired communications network.
Modify a wired communications network, according to the study carried out by a technician.
Install and wire the connection equipment at the ends of the cable communications networks.
Carry out tests and measurements of cable communications networks.
Connect clients to wired communications networks
Supply specific materials and tools for customer connection to the wired communications network.
Install the equipment and connect the customer to the existing network.
Carry out tests and measurements of the cable network installed at a customer's premises.
The installer of wired communications networks can exercise his job in various fields such as the installation of telephone networks, the installation of cable networks for long distances and the installation of local networks within the company.
In general, it can operate on all networks using multipair copper cables, coaxial and optical fiber.
installs the various elements (boxes, boxes, distributors, tap-offs, etc.), then connects the cables to each other. It then ensures the connection of the various user equipment to the appropriate network. He performs the tests, measurements and adjustments of the various installations. He informs his client about the operating principles of the system. He reports to his superiors on the work he performs and the difficulties he encounters.
It works on multipair copper cable for the traditional telephone network or local business networks (computer networks), on coaxial cable to distribute, generally, television images, and on optical fiber for long distance distribution networks. very high speed data or local networks.
The installer of wired communications networks participates in the installation of wired networks allowing the transport of voice, data or images (VDI). On the basis of a technical file drawn up by a technician, he sets up the various cable communications networks whatever their structures (overhead, on poles, on facade, inside buildings or in underground conduits).
Consequently, a commission cannot accept a Di.Co. from a rental company (or rental) or worse still from an association (as often happens), since a company that deals only with rental has no qualifications and acknowledgments to draw up and sign a Di.Co. and cannot accept a Di.Co. by an authorized person who certifies the plants that are not their own and not taken over by the company in charge.
In the event that the DiCo. is signed by a third-party company, there is also a need to acquire the contract between the company and the installer who must be an integral part of the company in charge and lend their skills, knowledge and services only for it.
When renovating or buying a house, the reconstruction of the electrical system is considered a priority work. At home, the concept of safety undoubtedly passes through an electrical system in compliance with the law. In fact, short circuits and shocks are rare phenomena, but they inspire fear. Some notions, which we will give later, are fundamental for each of us. Enjoy the reading.
Simplifying an electrical system as much as possible, two wires, called phase conductors and neutral conductor. In addition, there is another cable, called ground , which discharges any over voltages in the ground. Between phase and neutral, the company that distributes electricity maintains an alternating voltage of 220 volts.
The ground, briefly, aims to protect people from the risk of electric shock (shock). It essentially consists of a system of conductors connected to one or more earth electrodes, inserted into the ground (for example metal stakes).
A single user (light bulbs, television, radio, electric razors, etc.) is connected to these wires via a power outlet. The current exits from one of the holes in the socket (the one connected to the phase), passes through, for example, the light bulb and returns to the second hole in the socket.
Upstream of the system there is a differential switch, commonly known as a life-saving device, a safety device capable of interrupting the electrical flow of energy in an electrical circuit in the event of an earth fault (electrical leakage) or electrocution.
certified network cable installer
Furthermore, only if the supply of the system is set up within the framework of the tender contract, then the system is purchased by the installing company, you are entitled to a 10% VAT and not 22%. In this case, the company will purchase the products from the supplier (cables, cables) with VAT at 22% and then will apply 10% VAT to the customer (thus going into a "VAT credit" towards the State )
The reference standard for electrical systems is CEI 64-8, entitled "Electrical installations with nominal voltage not exceeding 1000 V in alternating current and 1500 V in direct current". The standard contains the requirements concerning the project, implementation and verification of electrical systems.
Understanding if a plant is up to standard is not easy. It is up to the professional to certify to this effect . Let's see some mandatory features for a compliant system.
The CEI 64-08 standards make selectivity (disconnection) between RCDs mandatory. Therefore, the circuit will not be single, but divided into several parts. In general, the following separate circuits must be provided: • 10A basic lighting; • 10 A plug socket (one line every 15 sockets max.); • 16 A plug sockets (one line every 15 sockets max.).
In Italy, residual current devices must be installed in civil systems to deal with electrical leakage problems and, therefore, the risk of electrocution.
However, to be sure about the quality of your system , you should have the Certificate of Conformity or the Declaration of compliance of the system with the regulations . The Declaration of conformity (DiCo) is a document required when installing a new plant type electrical, plumbing, heating, cooking or fumes evacuation (flue) . While, the Declaration of compliance (DiRi) is a document, which replaces the Certificate of conformity, should the latter be non-existent or unavailable. Naturally, in order to have this Declaration available, the plant must be adapted to the legal requirements.
Supply and installation of an underground 3 kW electrical system (electricity, FM, earth, TV, telephone, intercom) for a 100 m2 apartment, including all the certifications required by law and building assistance. Number of high voltage light points 90, number of low voltage light points 10, one electrical panel.
These are just some of the many situations that usually create problems at the plant level, because they do not reflect the flexibility, characteristics and quality of a network built in a workmanlike manner, as required by the regulations in force!
Nowadays any household object is equipped with an ethernet port, such as PCs, televisions, video cameras, induction ovens, heating, lighting, etc ... and the integration of all these accessories in a network that does not comply with the standards described.
The structured cabling includes, next to the RJ45 sockets, also the provision of electrical sockets, for the correct connection of the various devices and therefore this system is usually integrated into the project.
Furthermore, not all systems can be installed by all telecommunications companies. In fact it is necessary in certain cases to have an authorization from the Ministry of Communications for the installation of so-called First Degree systems as indicated in the Ministerial Decree no. 314/1992, which allows the installation, extension and connection as well as the maintenance of internal systems of any type and potential .
In companies there are additional factors that need expansion necessary for work, such as VoIP for communication; this technology identifies the possibility of making telephone communications through the use of ADSL at very low costs, or the use of videoconferencing with higher quality, or streaming for TV networks, where many programs are now available on the Internet directly on websites television networks; not to mention video surveillance, an essential point for the safety of people and environments.
Then when they find themselves having to connect video cameras or PCs, they find themselves with an infrastructural deficiency, which requires masonry works, or the use of the wireless network alone, without considering that a wired network first of all has significantly higher performance, in terms of security is unassailable by possible malicious people and last but not least, electromagnetic pollution, already high in homes, does not increase, given the increase in the number of devices that use this technology.
In Italy, many building developers ignore the use of these networks, because they do not fully understand the enormous potential of the internet and its rapid evolution.
certified network cable installer training
The structure of the passive part of the wiring and in particular the one dedicated to the interconnections is represented as a tree diagram, where each section is connected to the other through a very specific choice depending on whether it is horizontal, vertical or backbone wiring and requires a knowledge of all the technical rules and standards, which require the specific use of a type of transmission medium.
Wired networks are widespread in all sectors, from commercial and industrial to housing, where they are necessary for the integration of services dedicated to home automation, video surveillance, etc.
Studio Tarantella designs wired networks of all types and sizes, from homes, small offices, to campuses made up of multiple buildings.
The evolution and the need for a wired network is increasing, for this reason the main characteristics and applications are illustrated below
The history of connections between computer networks arises from proprietary systems, where the main brands have created their own networks, with apoosite protocols, but the poor integration between the various manufacturers has led to the need to create standards for the design and construction of the equipment and installation.
Structured cabling is an electronic system that allows the use of data transmission services, through the integration of different types of interfaces, both with physical connections, such as optical fiber and copper cable, and with the ether through wireless networks.
This infrastructure consists of a passive part identified by cables, user sockets, rack cabinets, connectors and patch panels (patch panels) for copper cables and optical drawers for fiber cables, which on the active part , identified with routers, switches, firewalls and access point.
The structured cabling is a type of computer network that identifies an integrated infrastructure for the implementation of a number of services, which are the principal for the use of voice and data.
Until recently, we have been used to identifying the wiring as the LAN (Local area network), which corresponds to a local computer network where a connection is created between computers in a restricted area.
When you perform each and every one of the activities corresponding to all the modules of the course and send them to the corresponding tutors, you will receive a Certificate of Attendance.
By presenting and approving the Final Project assigned by the tutor, you will receive a certificate of approval of the course issued by the Distance Learning Corporate System recognized by the main companies under the private teaching modality.
perating system and programs. Security strategies. User account. Enabling and canceling services. Firewalls. Firewall configuration. Virus and antivirus. Spyware and antispyware. Restrict access to unwanted sites.The course is through the Internet in the form of an online course or a distance course.
The content is configured according to the previous knowledge you have , as well as the type of computer, tablet or mobile you use.
Classes and exercises are taught from our virtual classroom from where you will have access to lessons, videos, electronic books, exercises and practices on real cases.
You don't need to be connected at a certain time. You can take the lessons at any time and every day of the week (24 hours) .You will learn at your own pace . To complete the course you have a period of one year from the start date
Windows and Linux systems. Share resources at home and business. Share folders. Manage permissions. Share the Internet connection. Access management. Mail boxes. Share printers. Solution to print queue problems.
Electrical interruption. UPS systems. Information backup systems. How to make regular backups. Network maintenance. Diagnosis and solution to network problems. Remote connections.
Networks, we are surrounded by them, each day more present and necessary in work, home, entertainment and industry.
The rise of networks in their different protocols and forms of implementation has exponentially increased work requests where technicians who know how to install, configure and maintain networks are required.
For this reason, has developed this online course that covers all aspects related to the installation of networks.
Course attendees learn how to use LinkWare to accelerate the presentation of certification results and deliver statistics, this is a great tool to get an immediate view of large amounts of measurement data.
And upon successful completion of the Fluke Networks CCTT Course, the local representative will deliver the certificates of approval of the attendees
At the end of the course, the student will be prepared to face the project of a structured cabling in both copper and fiber optics and direct its implementation. Currently there is an obligation to carry out Structured Cabling projects in buildings belonging, although it is increasingly common for there to be mandatory regulations in this area. which will be extended to the state level in the future.
To obtain the official network cable certifications certification , participants have to pass a final written exam. The exam is multiple choice with the closed book and consists of 100 questions. The minimum score is 70% correct answers. In addition, the skills and techniques of working with fiber optics must be demonstrated in practical workshops.
If you want to attend the certified fiber optic technician course or receive more information, please fill out and send the following contact form and we will forward it to the course organizer immediately .
It has a very important practical part that accounts for approximately 70% of the course time. In the practical part you work on fiber optic cables, connectors, splices , use test equipment and design a fiber optic network according to what was learned in the course. To start each practical workshop, the teacher shows in great detail how the different techniques and methods are performed working with fiber optics and constantly monitors the progress and teaches how to improve the technique
The training delivered in this course will give your company a competitive advantage and deliver smart work tools, avoiding common mistakes in order to grow your business
An eminently practical 24-hour course, in which the safety standards for fiber optic work, the types of fibers, and the techniques for fiber optic splicing and connectorization will be studied. The basic concepts of light and the principles of optical transmission will also be studied, as well as the equipment to carry out fiber optic measurements (OTDR and power meter)
CompTIA Project + training certifies knowledge of project management principles. The project management profession is growing rapidly and with that comes increasing competitiveness in the job market.
The Project + certification sets you apart from other applicants as it demonstrates skills beyond technical knowledge. Validate your skills to lead and build relationships, complete projects on time and on budget.
CompTIA Cloud Essentials Certification provides IT professionals with the skills necessary to operate effectively in a cloud environment. Understanding cloud-based technologies is a highly desired skill as businesses and enterprises move to this innovative, cost-saving storage solution.
CompTIA Security + training from New Horizons Panama provides an excellent introduction to the field of security and is typically a better entry point than jumping right into an advanced security program. With Seguridad +, you will build a solid foundation of knowledge that you can build on, helping you advance your career in the months and years to come.
If your goal is to become a Certified Security + for your job, to test your basic knowledge of security concepts, or to gain more knowledge to secure your network, New Horizons Expert Training is the perfect solution.
This course is intended for students who wish to prepare for the CompTIA Security + Certification exam. The qualification is primarily aimed at networking professionals, but because security is vital for all job levels and roles within an organization, it will also benefit PC support analysts, application developers, and senior managers in accounting, sales, product development and marketing.
As more and more companies shift their IT operations to cloud platforms, skills in cloud computing and virtualization have become a frequently required qualification for IT professionals. Adding CompTIA Cloud + to your resume shows your ability to implement and maintain cloud technologies and allows you to jump into a rapidly growing market:
In this course, students will identify PC components, work with files and folders, and perform basic software installations. This course will provide students with the fundamental skills and concepts required to maintain, support, and work efficiently with personal computers.
In addition, it covers the essential skills and information required to configure, configure, maintain, troubleshoot, and perform preventive maintenance of the hardware and software components of a basic personal computer workstation and basic wireless devices. Students will also implement basic security measures and implement basic computer and user support practices
In the CompTIA CTT + course, students will learn how to plan and prepare to teach a course, and how to select and implement various delivery methods. It covers how to demonstrate professional conduct and content expertise, how to use communication and presentation skills to facilitate learning, and how to establish and maintain a learner-centered environment.
Students will also learn techniques for evaluating student performance through an event and techniques for evaluating their performance in training and delivering a course.
CompTIA Server + certified candidates can work in any environment as this is the only certification that is not offered by a vendor, and it covers all major server platforms. It is the only certification in the industry that covers the latest server technologies, including virtualization, security, and network attached storage
This course is intended for entry-level IT support professionals with a basic understanding of hardware, software, and operating systems who wish to prepare for the CompTIA Network + exam. It is also suitable for those who want to increase their knowledge and understanding of networking concepts and acquire the skills necessary to prepare for a career in network support or management.
The CompTIA A + certification is an internationally recognized and vendor-neutral certification that many employers consider a prerequisite for entry-level IT employment. A + certification means that the individual is capable of performing tasks such as installation, configuration, and troubleshooting of common PC systems
New Horizons Panama is an authorized CompTIA Platinum Partner provider of the most current CompTIA courses to help you prepare for CompTIA certifications or advance your technology skills.
Deciding to work in the IT industry is an exceptionally good option. Earning an IT certification can help you get started and get ahead in your career. The CompTIA IT Certification Roadmap can make navigating the world of IT certifications a little easier.
